dracotomes
Joined 1 year ago
Karma
28
Submissions
12
Member since
Mar 18
Recent submissions
Comment · 1 month ago
I'm running it a rootless podman container it set up itself while still running directly on the host. I map the .pi directory into the container so all the sessions and skills persist. Then it's just a matter of mapping the current project folder into the container.
Comment · 1 month ago
I still have a 5700XT I bought in 2019 (i think) for 300€ in my gaming rig. Crazy that they were going for $500 6 years later.
Comment · 3 months ago
I don't know if there is a pre-made solution but it's easily doable using something like an ESP32 or a Pico W and a little soldering.
Maybe ESPHome has IR support but I used a micropython library and a spreadsheet to decipher a Mitsubishi Heavy IR remote. You can then use the same library to play a string of bits through an IR LED[1].
You can get IR receivers and transmitters for cheap on Amazon. You can pair that with any commonly used sensor (DHT22, HTU21, etc... I prefer the BME280), for all of which you can find libraries on GitHub and breakout boards cheaply online.
Then you could either implement a small web server to control it standalone or an MQTT client to control it from i.e. Home Assistant.
If you use an I2C sensor, and something like this[2] you don't even need to solder anything you can just connect it all using those DuPont cables and stuff it in a box.
[1] https://github.com/peterhinch/micropython_ir/issues/46 [2] https://www.tindie.com/products/maxmixproject/power-bus/
Comment · 3 months ago
Isn't that what what George Hotz is doing over at tiny? https://tinycorp.myshopify.com/
Comment · 4 months ago
Very interesting article. I'm looking to get my first robot arm soon-ish, probably something in the SO-101 category.
Can someone get reasonably far using recorded sessions compared to training in a simulated environment¹?
Do you have any experience with third-party or DIY attachments for robot arms? I assume it's going to be more difficult for something like the Ufactory arm vs. the open models.
Comment · 5 months ago
I've only had one Prusa printer, a MINI+ and it's been an absolute workhorse and easy to repair using the official instructions (I assembled my unit myself and pulled a zip-tie too tight, which caused the part cooling fan cable to break).
You do pay a premium. I, personally, also found PrusaSlicer to have better presets and usability than OrcaSlicer or it's forks.
Comment · 8 months ago
I switched from Fusion to FreeCAD when I bid Windows goodbye (this video inspired me https://www.youtube.com/watch?v=VEfNRST_3x8).
Fusion does a LOT of stuff for you that FreeCAD doesn't - i.e. extrude a pad from two intersecting shapes in a sketch. While this is annoying at first I feel it forces me to design smarter.
I've had a few crashes and the constraint solver sometimes seems to behave weird and takes a ctrl+z and a second attempt at the same action to properly add a constraint but overall my experience has been pretty positive.
Comment · 11 months ago
and it's back
Comment · 1 year ago
If the router were compromised, what use would "Having a competent firewall on your residential router" be?
The edit was in response to "network operator's routers [...] don't perform any sort of filtering" and had nothing to do with C2 traffic?
Comment · 1 year ago
Is there any residential router that exposes internal endpoints be default? I've yet to come across one that does not have a deny-any policy on it's WAN interface and has incoming destination NATs setup up.
What use is reducing the attack surface of a device which only ever initiates connections?
Edit: also there are network operators that block customer traffic on certain ports liike NetBIOS, SMB or SMTP to name a few.
Comment · 1 year ago
I self host a mail server too. Static IPs are not available for a residential connection where I live which makes PTR and SPF records hard.
What I've been doing is using Oracle's "always free" VM to host VyOS as an ingress/egress router. It's been pretty easy to set up the mail server itself using iRedMail.
I've had some problems with spamhaus and outlook because that whole IP range is not trustworthy but otherwise it's just worked (Spamhaus was nice enough to put me on a whiltelist).
I know hosting at Oracle is not moving away from US cloud services but I set this up two years ago and this could be achieved using any cheap or free VPS.