btoptical
Joined 12 years ago
Joined 12 years ago
Firstly it's not at all equivalent to an AM radio. It is an AM modulated carrier but that's about it. The detection scheme direct detection and not coherent like in an AM radio.
Also your power spectral density would be fairly low as your AM modulation would be distributed over a huge wavelength range. So taking a narrow slice with a tunable optical filter (which aren't that narrow really) would mean the detector would see a very small signal indeed.
Given that it's so broadband, my guess is that it's probably not low intensity noise at all (modern communications lasers are ~-140dB/Hz) and thus wouldn't make a great direct detection OOK source. So this would limit ultimately the sensitivity of such an AM modulated system. Being so broadband means that it's not at all suitable for phase modulated signal because by definition it would have high phase noise. Overall the spectral efficiency of such a source as a communications device is abysmal.
Additionally the silicon detectors that are needed to convert the light signal back into an electrical signal have low responsivity and speed. So the poor detector speed places an upper bound on the supportable BW and poor Si responsivity places a limit on the overall sensitivity of the system.
It's much, much more efficient to use IR sources all the way around. Materials in the IR are really efficient for both light generation and detection. There are lots of other reasons why IR is better for free-space communications as well (less scattering and higher material transparencies generally).
No a white laser is good for other reasons. There are lots of places where we still use things like Xenon lamps for measurement of things.
Other than the high end parts used in this device, it is fairly low-tech compared to most modern communications systems. That is a good thing for something like this I guess.
The US consumes about 19.05M barrels of oil per day. Each barrel of oil is about 1.6 MWh of power.
So this is 31017210 MWh (3.1 x 10^10 kWh) of power just in oil every day..
The solar constant is 1.36kW/m^2 on average. Solar panels convert solar energy into power with roughly a 14% efficiency or about 190W/m^2 or about 2.2kWh/m^2 in 12hrs.
Taking 3.1 x 10^10 kWh/(2.2kWh/m^2) I get 13 x 10^9 m^2. Converting this to miles gives us about 5240sq miles of solar panels just to get the same amount of energy we consume in oil.
Hopefully I did everything right above.
There are limitations on how good the extinction (cancellation) can be based on how well the losses are matched in the respective waveguides.
In this case of this paper, I imagine that the phase relationship will be much more complex and it will highly wavelength dependent.
http://www.lightreading.com/business-employment/how-do-nokia...?
Includes discussion of how such a merger would affect Juniper. Juniper is ALU's IP routing partner.
The QSFP's are "spaced for optimal airflow." However this spacing seems to neglect cooling the QSFPs themselves. Belly-to-belly mounting of modules is usually the most thermally challenging way to arrange them. The heat dissipated by the QSFP's is generally directed towards the top of the module. By placing open air channels between modules, they have effectively ensured that little to no air flows over the QSFP heat sinks (which is not shown). So there is probably a limitation on which reach codes are supported. My guess is that because of the thermal limitations of this design, it's not truly non-blocking in all reach configurations.
My next door neighbor lost 4 of his fingers in a table saw accident. I believe in personal responsibility but losing 4 fingers on your dominant hand is a pretty high price to pay for a mistake particularly when a viable safety technology is available.
Yet there was huge opposition to adopting this technology in table saws.
The Colbert Report on Saw Stop http://thecolbertreport.cc.com/videos/hgxqxc/people-who-are-... stop