abrugsch

VW doesn't trust graphene to allow their apps to run on it :(

Thank you! I suspected this to be the case, but was never interested enough to go and look up the history of the technique.

Not even photoshop. Literal cut and paste of physical photos :D

looks like every kebab shop menu near me. All offerings crudely cut/pasted/mashed together. 5 near me literally have the same menu with different prices and a colour theme to match their (usually terrible, 3-D font effect from 90's era Corel Draw) Logo. And they were like that BEFORE GenAI got popular!

Good to know. I've never spent more than a few hours on NYC transit and I didn't notice many differences on the trains I went on, so was largely going by found media and assumption (terrible thing to do, I know!)

Ah thanks. I had thought there would be some consolidation by now. It's been a few years since I regularly went to London and haven't been following it closely.

Doesn't NYC mostly (mostly) use the same trains across the network? on the tube, each line was (historically) operated by a different train company, so most lines have a (somewhat) different profile but dedicated rolling stock to each line, along with different aged stock dependent on the procurement cycle or even age of the line itself.

Boston T would be a better one as each of the colour lines are significantly different from each other, especially concerning green line trolleys. Even having not lived there for a number of decades I could probably still pick out at least red and green line. I might struggle to pick apart orange and blue line from each other as they are pretty similar trains, but I never spent significant time on that line... (My dad was a complete train nut and spent much of his spare time audio recording train rides around the world and when we lived in Boston, the local subway got the bulk of his attention. Here in the UK his hobby even got picked up by various TV companies and he got brought onto various talk shows to demonstrate his "Blind trainspotting" prowess by identifying various trains from their sound. All a ruse of course but it was a fun gimmick for a couple of years.)

Up and down intermittently (mostly down) just browsing repos for me. I get the unicorn "No Server Available" page.

Git status says everything is fine and downdetector says otherwise...

Doing a commandline git clone seems to be OK though (albeit on a very small project)

Can you not use the "free for hobbyists" license? Autodesk make it unreasonably hard to renew it, instead dark-patterning you into upgrading to the paid tier. (Unless of course you need paid tier features) I agree on the easy to use front though. I'm trying to move to freecad but it hasn't had its blender moment yet.

getting the hardware is only half the battle. Hard agree with going for a MiSTer setup however it's quite an expense for someone dipping a toe in.

ultimately it's hard to prescribe the "definitive" amiga experience in 2025 to a total newbie. At a surface level, for many people, amiga ownership was simply a console like experience -> Buy an amiga 500, and shovel game disks into it, play game, turn it off. Replicating that is super easy with either just a raspberry pi and the PiMiga distro (see the Chris Edwards youtube channel for details) or even retropie comes with support for amiga OOTB however it comes with the caveat of having a little background knowledge of the hardware combinations available. The ABSOLUTE easiest way of getting a taste of amiga is to get hold of a "The A500" mini console which comes with pre-packaged games (but also lets you run your own once you've got to the end of enjoying the 30 or so pack-ins).

There is the WinUAE emulator for windows that's excellent (so good, you can use it to prep real-world Hard drives for actual physical amigas) but it's complicated without prior knowledge of the OG hardware combinations.

The most common setup back in the day (for UKers playing games at least) was an OG Amiga 500 with OCS (Original Chip Set) with 0.5MB RAM(ChipRAM - essentially shared system and graphics memory) and maybe an optional extra 0.5 MB upgrade (FastRAM - CPU only memory, though often known now as SlowRAM because it was directly accessable by the CPU only but had to share the bus with the chip RAM) and 1.3 Kickstart ROM.

This was later upgraded by the A500+ which came with ECS (Enhanced Chip Set) which gave a few added graphical modes, 1MB of Chip RAM (typically upgradable to +1MB fast RAM) and kickstart 2.0. it broke compatibility with some games and was a min spec for others.

This was replaced directly by the A1200 which came with an upgraded CPU (68020ec at 14 MHz) AGA chipset (16.7 mil colour palette, 256 on screen), internal IDE interface and kickstart 3.0 with 2MB ChipRAM out of the box.

The A500+ was also indirectly replaced with the A600. Essentially a A500+ mini - they updated the manuafcturing to surface mount, reduced the PCB size significantly and removed the numberpad from the keyboard and added the IDE interface from the A1200. it was supposed to be a cost reduced version but initially cost more to make than the outgoing A500+. It was hated at the time because it cost more at retail and had less features (lack of keypad broke a lot of software, IDE interface wasn't seen as beneficial at the time and the side expansion port was replaced by a PCMCIA port which again only had much more expensive peripherals at the time) The rest are the "Big Box" amigas - computers with a separate keyboard from the main box case: A1000 (the OG or just "Amiga" when it launched)

A2000 - The workhorse version of thw A500 with expansion, processor,video upgrade slots.

A1500 - a UK specific cut down version of the A2000 just launched to inflict trademark damage to a sole trader startup making aftermarket cases for the A500.

A3000 - the first fully 32-bit platform - ECS and 32-bit 680x0 CPUs available (IIRC both 68020 and 68030 though might be wrong about the '020)

A4000 - a big box equivalent to the A1200 - AGA and expansion

A4000T - towerized version of A4000 - the holy grail for collectors and rare as hens teeth.

However in 2025 getting involved with the amiga scene is a huge rabbit hole as the community is so large there are always wonderful projects (such as PiStorm) for enhancing and extending the life of these now very aged machines.

Sorry, this ended up a bit of an essay on what was only supposed to be a quick note...

My workaround for multiple PCB's for one schematic is to have the schematic as a top level sheet which can then be imported into sub-level projects. so each PCB becomes it's own project but use the common schematic sheet

My personal experience with a modern microwave (they mostly seem to be the same design internally, coming from the same chassis with the same electronics just a different button panel) was that the internal light bulb blowing generated a surge (it was a mains voltage bulb) that wasn't fused so the next nearest thing in the mains circuit was a trace on the motherboard that vaporized.

There is no way of easily changing this bulb (inside the main casing with no access panel for the bulb) so for want of a single in-line fuse, the entire microwave was rendered scrap[0] by the lifetime of a light bulb.

[0] - Except for the fact that I care not for electrical safety "DO NOT OPEN" warnings of doom due to being actually competent with handling high voltage equipment and being able to do a board level repair on the burned out trace without touching the very large capacitors associated with the very high voltage side controlling the magnetron...

Just saying "Pixar movies" was probably not a great example. They can be deliberately location ambiguous (Monsters Inc., Toy Story - though it's clearly _somewhere_ in America, The Incredibles - a generic "metropolis"/50's futuristic city, lightyear, Elemental) or very specifically somewhere (cars - mashup of Route 66 towns, Finding Nemo - Sydney when on land, Ratatouille - Paris, etc...)

It makes sense to "translate" locale cultural indicators in say Wall·E which was very location agnostic but not so much for say Turning red which is very culturally specific.