metal_am

There are startups. See Standard Nuclear making TRISO or X-Energy

Radiation damage is no joke!

Beehive is 3D printing jet engines today, albeit small and potentially only going one way.

Try machining some printed 316 stainless! It’s basically pre work hardened from the thermal stresses!

Some alloys don’t like to be melted. If an alloy has a large solidification range, certain areas can partially solidify without the liquid part keeping up to fill in the gaps so to speak. This leads to solidification cracking / hot tearing. This is a simplification and only one possible cause, but there are literal books written about this kind of thing (I like Solidification by Dantzig and Rappaz). This is also why you see things like friction stir welding for rocket bodies. No melting means no solidification means no solidification issues.

That's pretty much the Feynman technique. It absolutely works.

MIPS is a one and done kind of thing for major impacts.

I'd love to hear some examples!

Developed film has a bar code type of encoding for DX info. The talk about the whole roll is the ability to scan the entire thing in one go vs having to load in multiple strips.

This is a very surface level analysis like saying that the automobile was just an iterative improvement over a horse. Or a computer is just a better abacus. Fundamental research is all about diving into the weeds and finding new problems to solve. It's true that some of the "low hanging fruit" no longer exists (you won't see someone like Euler or Newton who's names pop up all over the place), but I can promise you that real gains are being made on a lower level. These small gains in fundamental research snowball into bigger advancements. As an example, the transformer architecture used by LLMs was first published in 2017.

If you found one for that price with the controller and pendent, please send me a link. I’ve looked a lot and have not seen any UR for remotely that cheap.

Looks like spot melt laser powder bed fusion (L-PBF). Electron beam doesn’t make sense for something on a smaller scale like this; it wouldn't have the resolution. Spot melt is interesting. Renishaw is the only manufacturer I’m aware of that uses a pulsed laser vs continuous wave (and I’m not even sure if they’re still doing that for their newer machines). I would’ve guessed it would’ve been printed on a Farsoon since it’s in China. I just wish the images had scale bars to give a little more info.

I have both a resin and FDM printer. The FDM is hands down easier to work with than dealing with resin. FDM ABS is also a far better material than ABS-like resin. (Disclosure: I've never tried a proper industrial resin from LOCTITE or something.)

I've been very happy with my Qidi Q1 Pro. I paid about $350 pre-tax off Amazon almost a year ago (Black Friday). For me, it was the most machine for the lowest cost I could find. It almost fits your desired print volume (245 x 245 x 240), but it is fully enclosed and has a dedicated chamber heater. I have almost exclusively printed ABS at a 60 deg. C chamber temp. It runs open source Klipper firmware, but I'd imagine repairability wouldn't be the best. Best of all, I have not needed any calibration. It seems pretty spot on out of the box.

My Voron is hands down a better printer but also required significantly more investments in components and especially time.

You're making me wish I still had access to a CMM. I wonder what the tolerances are on an iPhone.