lulf
Joined 8 years ago
Karma
102
Submissions
16
Member since
May 31
Recent submissions
Comment · 2 years ago
Comment · 2 years ago
One of the things not immediately apparent for people coming to Embassy is that you can mix and match RTIC with the Embassy HALs. So the more appropriate comparison is RTIC vs the Embassy async executors.
Comment · 3 years ago
Check out https://vespa.ai
Comment · 3 years ago
Async Rust is great for embedded! Check out https://embassy.dev as well which is very similar but with support for more hardware.
Comment · 5 years ago
You might want to take a look at the embassy project for a unified stm32 HAL. The idea is that it defines the APIs per peripheral version as defined by STM (spi v1, spi v2, usart v1 etc). The advantage is that a given peripheral can be used across all stm32 families with that version. This makes maintaining a HAL and keeping a unified API much simpler.
The other part is the stm32-metapac (not specific to async) that generates the PAC for any stm32 chip.
Read more about embassy here: https://github.com/embassy-rs/embassy
Comment · 5 years ago
You can use a subset of MQTT for ingress data and store it in Kafka for instance. Check out https://www.drogue.io and https://sandbox.drogue.cloud for an open source project that does that
Comment · 5 years ago
This was an inaccuracy on my part, sorry for that. It should probably have been "... used in multiple places _at the same time_".
Comment · 5 years ago
Having distinct types for P0 and P1 is deliberate and is what is called "type state programming" in the embedded rust book [0]. The advantage is that you can prevent misconfiguration at compile time (ensuring that a given pin cannot be used in multiple places). In the Zig example, it seems to me (and I have zero knowledge of Zig, so sorry if this is inaccurate) that you can potentially introduce bugs where the same pin is used twice.
For a generic led driver, it should not use these types, but instead the trait types from the embedded_hal crate, such as "OutputPin" that is implemented by the different chip-specific HALs. There is an example of a generic led driver that uses these traits at [1].
In general I recommend everyone who wants to try out Rust on embedded to read the embedded rust book, because it clarifies a lot of the reasons and advantages of its approach.
[0] https://docs.rust-embedded.org/book/static-guarantees/typest...
[1] https://github.com/drogue-iot/drogue-device/blob/main/rt/src...
Comment · 6 years ago
I’ll throw in another alternative to look at for those using Kubernetes: https://enmasse.io
Comment · 6 years ago
I'll add that the AMQP 1.0 spec (supported in Rabbit using a plugin) is a peer-to-peer protocol that supports both the traditional broker use case, 'direct' p2p messaging and opens some interesting uses of message routers like Apache Qpid Dispatch Router.
Comment · 6 years ago
For Java, have a look at vertx-proton which builds on top of proton-j and is a bit more intuitive (still not great) than proton-j for creating servers and clients. :)
Example “blocking” client https://github.com/EnMasseProject/enmasse/blob/master/amqp-u... , but might give an idea of how to set “dynamic source” required for rpc.
In general though I think the Qpid python and c++ examples might be better.
Comment · 6 years ago
Couple of protocols that would be nice to benchmark for comparison:
* AMQP 1.0 - can also be used for RPC without a broker in between client and server. See https://qpid.apache.org/proton/
* Aeron - low latency, UDP based, see https://github.com/real-logic/aeron
Comment · 7 years ago
If you don’t use any other pattern than request-response, I agree there is no point.
If you have a mix of pub-sub, work queues and request-response, it could simplify your dependencies perhaps.
Also AMQP 1.0 has some nice async capabilities and acknowledge modes that I believe goes beyond what http/2 and grpc supports today.
OTOH I don’t have any real world experience operating such a mix of different communication patterns, so it could be the advantage is insignificant.
Comment · 7 years ago
I recommend looking at a standard messaging protocol like AMQP 1.0, which will allow you to implement the request-response pattern in an efficient manner without message brokers. Either “direct” client server as with HTTP , or via an intermediary such as the Apache Qpid Dispatch Router.
With the dispatch router, you can use pattern matching to specify if addresses should be routed to a broker or be routed directly to a particular service.
This is way you can get the semantics that best fits your use case.
Comment · 7 years ago
Check out Vespa: https://vespa.ai
A lot of applications simply don't use the MPU. And then consider what you get from Rust memory safety and the reduction in overall complexity of the firmware without the RTOS.