jonaswi

thank you for evcc - awesome pice of software that I'm using every day. I actually built some small prediction models around it figuring out if I should charge my car or feed in the electricity. Not sure if that is what you have in mind but I would be interested to hear what kind of algorithm you have in mind. Maybe I can help?

Is there still coil whine when running Linux on the XPS?

The door stays open for n amount of time (normally around 1min but I changed it to 30sec). The drive has a laser sensor attached to it (it is required to have installed with automatic doors in Switzerland if you don't want any issue with insurance). As soon as the specified amount of time has passed, the door drive tries to close the door. It only works if the laser sensor detects no obstacles.

Maybe a bit off-topic but: The only thing that differs an "fire-protection approved" door drive from a non approved drive is that the drive is not allowed to have an option to keep the door open. Also in case of power outage (or fire) the door needs to close without power.

Do you by chance have a link to a good development kit for the esp32? I checked and I'm a bit overwhelmed by the amount of different components one can get.

Thanks! Will do some research and then try to order the right one.

I don't use this specific drive due to the fact that another company gave me a better deal for some marketing. But if I had to choose again, I would buy a dormakaba ED 100 or ED 250 (depending on the weight of your door). They support multiple opening angles depending on how you activate it.

Thanks for the tips! I will order a esp8266 and check it out.

No sadly not. I'd love to write about it but my English is just not good enough to write a compelling story. Writing it in German and then having it translated is always a bit of a hassle. But I may consider it. At the moment I have an offer of the door drive manufacturer for doing a "home story" about the solution. If that will happen, it will definitely be released in English.

I will open source everything once I'm happy with the security and the ability to configure it.

As you might have guessed, that came to my mind too. Due to the fact that I have worked with a company in the fire damper business, I was contacting them and we were brainstorming about it. The thing is: The market is just non existent. Also fire-protection regulations can be very specific depending on the country you are in. For example, EU ratings are not always recognized here in Switzerland.

Since last week I'm in contact with the manufacturer of the door drive tough because they maybe want to create a product out of it. To be honest I think it would pure marketing and at the moment it is very unlikely to ever hit the market.

You are exactly right. Before I "optimised" the image recognition the whole detection part was running on a Mac Mini. I also like to "separate concerns". The Pi that is handling the door opening runs Alpine with a read-only file system so whenever there is a power outage or whatever it boots into a known good state. The image processing part is behind a big UPS and is running with a writable file system.

I live in an apartment with quite strict fire-protection standards. Due to the fact that I have a cat that absolutly loves to go outside, I needed to find a solution for him to get outside without a catdoor trough my door.

So I installed a fire-protecion-approved door drive that is hooked to a raspberry pi. Another raspberry pi then analyzes a video stream and detects my cat. If my cat is in the frame for n amount of time, a message is sent to the pi conntected to the door drive and the door opens up slightly for him to get in.

I think it depends if you are using Linux or Windows. With Linux there still is to this date a noticeable coil whine while watching videos and doing other graphic intensive stuff.