0culus

Bill and Dave would be spinning if they knew what has been done to their formerly great company.

Well, with a 28.8 years half life it should glow a while. BUT, the largest license exempt quantity one can get iirc is 0.1 uCi. Plus it’s a fission product so good luck making it yourself. :) I don’t recommend the radioactive Boy Scout approach.

While AoE (and the newly released X-Chapters!) is an excellent handbook to keep around, I would agree with the other commenters that it is not a particularly friendly textbook for a beginner.

Just to be certain, you realize that Duffel Blog is a satire site, right?

Scale matters too. As I clearly stated, I am not making electronics at industrial scales, nor am I generating large quantities of e-waste.

As for hacker spaces, why on earth would anyone in their right mind assume that it would be ok to not wash hands, eat, drink, etc in that environment _and_ let their kids work there without the same precautions, leaded solder or no?

This is from the perspective of a hobbyist who does _not_ do industrial quantities of soldering, but rather the occasional build or the occasional repair of a piece of old test equipment.

I use eutectic 63/37 Kester solder in several sizes for everything. With my temp controlled Weller station, it's the bee's knees for making quality joints quickly.

As far as worrying about safety, it's really down to common sense. In long time scales, the survival rate for everyone drops to zero. If you apply common sense, you can have fun while you're around and not have problems from lead solder.

Here's my "hot takes":

1) There's a reason why food and drink isn't allowed in professional labs of various kinds. Follow their example. Don't use your kitchen table as a workbench. Don't eat and drink in your work area. Don't lick solder. etc. etc.

If your living arrangement is so small that you can't separate them adequately, seek out a local hacker space or a friend who does have space.

2) Wash your hands thoroughly after soldering (and if you are doing projects with your kids, instill in them the instinct to wash their hands, too!) If I'm finding myself doing a lot of soldering/desoldering for a repair, I take frequent breaks and wash then, too. It also helps reduce mistakes.

3) At a minimum, use a desk fan to blow fumes away from your face. Better yet, invest in a fume extractor unit. I'd say the latter it's a necessity if you do a lot of soldering.

The bottom line is, choose what you prefer and what you are willing to risk using, and take appropriate precautions. Chances are, even if you eliminate lead solder from your hobby work, there's likely something equally as hazardous in your local environment that you are more systemically exposed to. Radon gas, naturally occurring drinking water contaminants (or sometimes unnaturally...), etc.

Thanks for your reply. I’m certainly going to keep a lookout for both.

What would you say is the final model that "has it"? Besides my vintage HPs (HP15C, 2xHP16C, HP45) I also have the 50g and the modern 35S. For me, the 50g's lack of a proper ENTER key ruins it. I'm sort of on the lookout for a nice 48 series to replace it for that reason. The 35S at least has a proper ENTER.

I have both the HP15C and two HP16Cs, though I am not old enough to have bought one new. :o) Truly awesome calculators, even if they are a bit slow sometimes. The form factor of the Voyagers is amazingly perfect; in fact the ratio of the length to width is approximately the Golden Ratio if I recall.

I use mine regularly as I prefer a tactile instrument. Plus the mental challenge of implementing programs in a constrained environment is invigorating.

Typing this from my 2017 12" MacBook...have not had a single issue with the keyboard. In fact, I have grown to quite like it. Sure it's not my beloved WASD Code with the Cherry Clears, but it's one of the better portable keyboards in terms of typing experience of late, in my opinion.

Accessing the recent photos is now accessed directly as one of those "iMessage App" icons that appears in the ribbon above the keyboard. However, the UI change is annoying and I constantly open the camera (though you can also get to recent photos by tapping the icon at the upper left of the camera, when inside messages).

I think the YubiKey nano is intended to be left in a port. I don't leave mine in though (keep it on my keyring!)

Both my undergrad and grad OS courses used xv6 and I can tell you that the easiest way to get hacking on it is to spin up a VM (I used vagrant for this since I just wanted headless) and run it in QEMU. MIT has a patched version available that has some handy debug features. Feel free to contact me through keybase and I can provide you all the scripts I used.