That's what they're focusing on to start with, but the temperature is high enough to drive heat engines to make power. There's more on the concept at the seed company's (Orca Sciences) web site and at Austin Vernon's blog.
They talk about temperature up to ~600 C, which I believe is limited by the desire to use cheap steal (much hotter and creep becomes a problem). This is also perhaps not coincidentally about the temperature of steam from a coal fired boiler, so one of the eventual goals is to repower retired coal fired power plants with this storage providing the heat instead of coal combustion.
You're right this is not good for something needed "a few times a year" for relatively short periods, for example to cover Dunkelflauten. Combustion of an e-fuel is better for that. But it's well suited to seasonal storage of solar energy, as that would be extracted over months, more or less continuously. The resistive heaters should also be much cheaper per W than electrolyzers.
https://www.orcasciences.com/articles/standard-thermal
https://austinvernon.substack.com/p/building-ultra-cheap-ene...
They talk about temperature up to ~600 C, which I believe is limited by the desire to use cheap steal (much hotter and creep becomes a problem). This is also perhaps not coincidentally about the temperature of steam from a coal fired boiler, so one of the eventual goals is to repower retired coal fired power plants with this storage providing the heat instead of coal combustion.
You're right this is not good for something needed "a few times a year" for relatively short periods, for example to cover Dunkelflauten. Combustion of an e-fuel is better for that. But it's well suited to seasonal storage of solar energy, as that would be extracted over months, more or less continuously. The resistive heaters should also be much cheaper per W than electrolyzers.