I feel like this poem isn't really about soldering, but if anyone is actually bothered by it, there are some options.
Unleaded solder and a decent fume extractor make the process cleaner. A decent soldering iron and solder wire with good-quality flux (e.g. Kester) makes it faster.
If you'd rather not deal with the iron, you can manually apply solder paste and use a hot air rework tool or even a heat gun (careful!) to melt it. (A proper reflow oven is better, of course, but that's pricey.) This makes working with surface-mount components much easier.
If you'd rather not deal with it at all, have a PCB assembled somewhere else. JLC is pretty cheap, especially on simpler boards.
Unleaded solder and a decent fume extractor make the process cleaner. A decent soldering iron and solder wire with good-quality flux (e.g. Kester) makes it faster.
If you'd rather not deal with the iron, you can manually apply solder paste and use a hot air rework tool or even a heat gun (careful!) to melt it. (A proper reflow oven is better, of course, but that's pricey.) This makes working with surface-mount components much easier.
If you'd rather not deal with it at all, have a PCB assembled somewhere else. JLC is pretty cheap, especially on simpler boards.