+1 for battery university, they're an excellent source. Does anyone have any other suggestions for similarly technically deep (while approachable) articles on any other facet consumer electronics?
My understanding from this article is that:
1. Charge the battery to as low a max percentage as possible (till about 65%)
2. Keep it as cool as possible (up to zero degrees C at least)
3. Use it as little as possible before recharging it (minimize charge-discharge bandwidth)
Aka, over-rate and over size the battery if you're building the device, and minimize extremes on any side of soc (state of charge).
Do EV manufacturers use any other tricks not covered by this?
(Of course, use the device as needed, these are just guidelines for the best perfomance.)
My understanding from this article is that:
1. Charge the battery to as low a max percentage as possible (till about 65%) 2. Keep it as cool as possible (up to zero degrees C at least) 3. Use it as little as possible before recharging it (minimize charge-discharge bandwidth)
Aka, over-rate and over size the battery if you're building the device, and minimize extremes on any side of soc (state of charge).
Do EV manufacturers use any other tricks not covered by this?
(Of course, use the device as needed, these are just guidelines for the best perfomance.)