Leaded solder is not a big health risk for hobbyists as long as you have proper fume extraction. Metallic lead is poorly absorbed through the skin (it _is_ absorbed from what I can find, but very very slowly), the major risk is from lead vapour and at normal soldering temperatures that’s very minimal.
However, lead free tin-silver-copper (SAC) solder is fairly easy to work with. You need a hotter soldering iron at around 300°C, and if soldering PCBs preheating the board to 80-100°C may be needed for good results. It may also take a bit longer for the solder to propagate flow and wet, since the surface needs to be hotter.
If you’re using additional flux or non-fluxed solder you’ll need to check it for compatibility, that should be on the data sheet. Most fluxes are fine, but I’ve seen a couple that say not to use with some lead free solder formulations.
The main downside to SAC lead free solder is the higher temperature required which can overheat some components, particularly capacitors and ICs in my experience. It’s a case of being careful to keep the heat duration as short as possible.
Personally I went back to lead solder and manage my exposure with ventilation and HEPA filters.
However, lead free tin-silver-copper (SAC) solder is fairly easy to work with. You need a hotter soldering iron at around 300°C, and if soldering PCBs preheating the board to 80-100°C may be needed for good results. It may also take a bit longer for the solder to propagate flow and wet, since the surface needs to be hotter.
If you’re using additional flux or non-fluxed solder you’ll need to check it for compatibility, that should be on the data sheet. Most fluxes are fine, but I’ve seen a couple that say not to use with some lead free solder formulations.
The main downside to SAC lead free solder is the higher temperature required which can overheat some components, particularly capacitors and ICs in my experience. It’s a case of being careful to keep the heat duration as short as possible.
Personally I went back to lead solder and manage my exposure with ventilation and HEPA filters.