One challenge was that while I started working on the Xbox 360 about three years before it would ship, we knew that the custom CPU would not be available until early 2005 (first chips arrived in early February). And there was only supposed to be one hardware spin before final release.
So I had no real hardware to test any of the software I was writing, and no other chips (like the Apple G5 we used as alpha kits) had the custom security hardware or boot sequence like the custom chip would have. But I still needed to provide the first stage boot loader which is stored in ROM inside the CPU weeks before first manufacture.
I ended up writing a simulator of the CPU (instruction level), to make progress on writing the boot code. Obviously my boot code and hypervisor would run perfectly on my simulator since I wrote both!
But IBM had also had a hardware accelerated cycle-accurate simulator that I got to use. I was required to boot the entire Xbox 360 kernel in their simulator before I could release the boot ROM. What takes a few seconds on hardware to boot took over 3 hours in simulation. The POST codes would be displayed every so often to let me know that progress was still being made.
The first CPU arrived on a Friday, by Saturday the electrical engineers flew to Austin to help get the chip on the motherboard and make sure FSB and other busses were all working. I arrived on Monday evening with a laptop containing the source code to the kernel, on Tuesday I compiled and flashed various versions, working through the typical bring-up issues. By Wednesday afternoon the kernel was running Quake, including sound output and controller input.
Three years of preparation to make my contribution to hardware bring-up as short as possible, since I would bottleneck everyone else in the development team until the CPU booted the kernel.
So I had no real hardware to test any of the software I was writing, and no other chips (like the Apple G5 we used as alpha kits) had the custom security hardware or boot sequence like the custom chip would have. But I still needed to provide the first stage boot loader which is stored in ROM inside the CPU weeks before first manufacture.
I ended up writing a simulator of the CPU (instruction level), to make progress on writing the boot code. Obviously my boot code and hypervisor would run perfectly on my simulator since I wrote both!
But IBM had also had a hardware accelerated cycle-accurate simulator that I got to use. I was required to boot the entire Xbox 360 kernel in their simulator before I could release the boot ROM. What takes a few seconds on hardware to boot took over 3 hours in simulation. The POST codes would be displayed every so often to let me know that progress was still being made.
The first CPU arrived on a Friday, by Saturday the electrical engineers flew to Austin to help get the chip on the motherboard and make sure FSB and other busses were all working. I arrived on Monday evening with a laptop containing the source code to the kernel, on Tuesday I compiled and flashed various versions, working through the typical bring-up issues. By Wednesday afternoon the kernel was running Quake, including sound output and controller input.
Three years of preparation to make my contribution to hardware bring-up as short as possible, since I would bottleneck everyone else in the development team until the CPU booted the kernel.