Note that your power consumption is more than just the CPU (combined TDP of 2x225W [0]). You also have to consider SSD (16x20W when fully loaded [1]), NIC (4x24W [2]), and the rest of the actual system itself (e.g. cooling, backplane).
Or, you can skip all the hand calculations and just fiddle with Dell's website to put together an order for a rack while trying to mirror the specs as closely as possible (I only included two NICs, since it complained that the configuration didn't have enough low-profile PCIe slots for four):
[0] https://www.amd.com/en/products/processors/server/epyc/7003-...
[1] I couldn't find 14TB enterprise SSDs on Intel's website, so I'm using the numbers from 6.4TB drives: https://ark.intel.com/content/www/us/en/ark/products/202708/...
[2] I'm not sure offhand which model number to use, but both models that support 200GbE on page 93-96 have this maximum wattage: https://docs.nvidia.com/nvidia-connectx-6-dx-ethernet-adapte...
Or, you can skip all the hand calculations and just fiddle with Dell's website to put together an order for a rack while trying to mirror the specs as closely as possible (I only included two NICs, since it complained that the configuration didn't have enough low-profile PCIe slots for four):
https://www.dell.com/en-us/shop/dell-poweredge-servers/power...
In this case, I selected a 1100W power supply and it's still yelling at me that it's not enough; 1400W is enough to make that nag go away.