In case anyone from the US reads this, BSPP and BSPT fittings are rare and incredibly frustrating here, as our NPT (National Pipe Taper) threads are different and the selection of BSP(P/T) fittings is extremely poor in comparison.
Also, I work with NPT fittings quite a lot:
> For what it’s worth, I tightly wrap the tape 10 times round the male thread and get an enraged mountain gorilla to tighten it up.
This is a WTF NO!!! for NPT and I’ll assume a WTF NO!!! for BSPT as well. You need about 1.5 wraps of PTFE tape to seal a fitting. Any more is wasteful and asking for leaks (or damage, if you’re using plastic fittings). It helps if you use the correct tape width for the fittings (1/4”, 1/2”, and 1” for me) and develop a wrapping method that keeps the tape under tension at all time and in such a direction that threading it into the fitting doesn’t unwrap the tape.
Also, in my experience, when someone inexperienced first learns what pipe tape is, they try to apply it to everything. 20 wraps around a tapered pipe? Wrap a Swagelok fitting? Try to make a butt joint or an adapter for two pieces of plastic tubing? I’ve seen it all.
Also, I work with NPT fittings quite a lot:
> For what it’s worth, I tightly wrap the tape 10 times round the male thread and get an enraged mountain gorilla to tighten it up.
This is a WTF NO!!! for NPT and I’ll assume a WTF NO!!! for BSPT as well. You need about 1.5 wraps of PTFE tape to seal a fitting. Any more is wasteful and asking for leaks (or damage, if you’re using plastic fittings). It helps if you use the correct tape width for the fittings (1/4”, 1/2”, and 1” for me) and develop a wrapping method that keeps the tape under tension at all time and in such a direction that threading it into the fitting doesn’t unwrap the tape.
Also, in my experience, when someone inexperienced first learns what pipe tape is, they try to apply it to everything. 20 wraps around a tapered pipe? Wrap a Swagelok fitting? Try to make a butt joint or an adapter for two pieces of plastic tubing? I’ve seen it all.