> The electronics seemed to be fabricated using bare dies attached to some substrate, probably to lower cost and improve reliability at higher temperatures. The board is made up of two parts, a low-power part with the CPU and CAN transceivers, and some high-power part with 6 MOSFETs forming a three phase H-Bridge.
It doesn't really look cheap to me (large machined surfaces on the cast aluminium casing, two ceramic PCBs, everything connected with wire bonding, even the motor windings and the external connector, which means that at least those bonds are carried out on an almost completely assembled product; also look at the sheer size of the motor bonds) but it does look very reliable - everything is bonded or welded, zero connectors, no fasteners, all solid state.
> https://blog.willemmelching.nl/images/vw/IMG_3181.jpg
It doesn't really look cheap to me (large machined surfaces on the cast aluminium casing, two ceramic PCBs, everything connected with wire bonding, even the motor windings and the external connector, which means that at least those bonds are carried out on an almost completely assembled product; also look at the sheer size of the motor bonds) but it does look very reliable - everything is bonded or welded, zero connectors, no fasteners, all solid state.