What frequency are you using and over what bandwidth? How many dB down are your sidelobes from your main beam? Are you using parabolic reflectors for your primary antennas, how big are they relative to your wavelength (what's the beamwidth)? What role do meta-materials play, are they the collimating relay? What about the sidelobes on the relay?
Why do you think 100 mW/cm^2 is 'safe'? You must know from experience this is enough for tissue heating, even from sidelobes many dB down.
Over what ranges do you think this is feasible? With, say 20 km of free space path loss in the 2.4 GHz ISM and 40 dB antenna gain at each end you're going to be at least 50 dB down. Doesn't this mean for things like transmitting power to islands this tech is not useful?
Even if you start at 1 KW in (60 dBm), over 20 km the receiving antenna is going to get about 0-10 dBm, or milliwatts.
With the same generous setup at 1 km and 1 kW you get 10 watts at the far end.
This just doesn't work out.
Why do you think 100 mW/cm^2 is 'safe'? You must know from experience this is enough for tissue heating, even from sidelobes many dB down.
Over what ranges do you think this is feasible? With, say 20 km of free space path loss in the 2.4 GHz ISM and 40 dB antenna gain at each end you're going to be at least 50 dB down. Doesn't this mean for things like transmitting power to islands this tech is not useful?
Even if you start at 1 KW in (60 dBm), over 20 km the receiving antenna is going to get about 0-10 dBm, or milliwatts.
With the same generous setup at 1 km and 1 kW you get 10 watts at the far end.
This just doesn't work out.