I don't think the pilot factors in that much into the cost of operating a helicopter. Even a small helicopter (e.g. Robinson R-44 which is a bare bones trainer) needs a ~250k complete overhaul every 2200 hours/12 years in service. Add $60 dollars per hour in fuel and 60-100 per hour of miscellaneous other maintenance, and your variable costs quickly approach 300/hr. Add in all the fixed overhead, and a tiny helicopter that can take 2 passengers and limited baggage will run $400 dollars per hour easily (which is about what they rent for). A bigger turbine helicopter is significantly more expensive.
Most of this is because helicopters are complex machines (you're spinning really big blades pretty fast. Then using the blades + bearing to also lift the weight of the helicopter + more. Oh and you're changing the pitch angle of the blades. Oh you mean changing the pitch angles of the blades WHILE THEY GO AROUND...) and any failure in any of these parts is usually fatal so they have to be built and maintained to a very high degree of reliability.
Airplanes are much simpler (the spinning propeller attached to an engine is one part. The wing generating lift is another part. the flight controls are yet another part) and have more opportunities for redundancy ( a wing has multiple spars, and is attached to the airplane with many bolts. All helicopter blades meet in one hub, which is attached on one axis).
Combine that with aircraft scaling up more (you can build 500 person aircraft, but only 20 person or so helicopters), going much faster (a 120 dollar/hr propeller plane will outrun many/most helicopters) and the cost to go a given distance by plane will always be much cheaper than a helicopter.
Most of this is because helicopters are complex machines (you're spinning really big blades pretty fast. Then using the blades + bearing to also lift the weight of the helicopter + more. Oh and you're changing the pitch angle of the blades. Oh you mean changing the pitch angles of the blades WHILE THEY GO AROUND...) and any failure in any of these parts is usually fatal so they have to be built and maintained to a very high degree of reliability.
Airplanes are much simpler (the spinning propeller attached to an engine is one part. The wing generating lift is another part. the flight controls are yet another part) and have more opportunities for redundancy ( a wing has multiple spars, and is attached to the airplane with many bolts. All helicopter blades meet in one hub, which is attached on one axis).
Combine that with aircraft scaling up more (you can build 500 person aircraft, but only 20 person or so helicopters), going much faster (a 120 dollar/hr propeller plane will outrun many/most helicopters) and the cost to go a given distance by plane will always be much cheaper than a helicopter.